How To Install Gigabyte z390 Motherboard

How To Install Gigabyte z390 Motherboard

Installing a motherboard can be a daunting task, especially if you’ve never done it before. But don’t worry, we’re here to help. In this guide, we’ll show you how to install the Gigabyte z390 motherboard. We’ll also provide some tips on how to make the process go as smoothly as possible. So let’s get started!

Installation Precautions:

  • Before you begin the installation process, there are a few things you need to keep in mind. 
  • Make sure that you have all the necessary tools and components. You’ll need a Phillips screwdriver, thermal paste, and a few other things. 
  • Always remove the AC plug from the power outlet before you start working on your PC. This will help prevent any accidental electrocutions. 
  • Be sure to ground yourself before handling any components. This will discharge any static electricity that might be on your body, which could damage sensitive components.
  • Avoid direct contact of screws with the motherboard or its components as it may cause a short circuit and damage your motherboard.
  • Avoid placing any component in wet and uneven places. 

Step 1: Prepare Motherboard: 

How To Install Gigabyte z390 Motherboard
Image Source Newegg Studios

The first step is to prepare the motherboard for installation. This involves removing all the screws from the motherboard and removing the I/O shield. The I/O shield is the metal plate that covers the back of the motherboard.

Step 2: Installing CPU and Cooler:

How To Install Gigabyte z390 Motherboard
Image Source Newegg Studios

Next, you’ll need to install the CPU and cooler. First, remove the CPU from its packaging and gently insert it into the socket. Make sure that it is properly seated and then close the latch.

Now you can apply thermal paste to the CPU. We recommend using a small amount of high-quality thermal paste. You can find this at most computer stores or online. 

Once the thermal paste is applied, you can install the cooler. Make sure that it is properly secured and connected to the CPU fan header. 

Step 3: Install Memory Modules (RAM): 

How To Install Gigabyte z390 Motherboard
Image Source Newegg Studios

The next step is to install the memory modules (RAM). First, unlock the DIMM slots by moving the plastic clips to the side. Then, insert the modules into the slots and make sure that they are properly seated. Once they are seated, you can lock the clips back into place.

Step 4: Install the Motherboard: 

How To Install Gigabyte z390 Motherboard
Image Source Newegg Studios

Now it’s time to install the motherboard. First, you’ll need to remove the existing motherboard if there is one. To do this, unscrew all of the screws that are holding it in place and then carefully remove it from the case. 

Now you can start installing the new motherboard. Begin by screwing in the standoffs to the appropriate locations. Make sure that they are tight so that the motherboard doesn’t move around. 

Once the standoffs are in place, you can carefully lower the motherboard into the case and align it with the I/O shield. Once it is aligned, you can start screwing in the screws to hold it in place. Be sure to not over-tighten the screws as this can damage the motherboard. 

Step 5: Install Expansion Cards: 

Now you can install any expansion cards that you need. This includes graphics cards, sound cards, and network cards. To do this, remove the slot covers from the back of the case and then insert the cards into the appropriate slots. Once they are in place, you can screw them in or use the provided brackets to secure them. 

Step 6: Connect Power Supply:

How To Install Gigabyte z390 Motherboard
Image Source Newegg Studios

Now you’ll need to connect the power supply. First, locate the proper connector on the motherboard and then connect the 24-pin ATX power cable. Next, you’ll need to connect the 4/8-pin CPU power cable. These are usually located near the CPU socket. 

Once the power cables are connected, you can screw in the PSU and then plug it into an outlet. 

Step 7: Install Storage Devices: 

How To Install Gigabyte z390 Motherboard
Image Source Newegg Studios

Now it’s time to install your storage devices. This includes your hard drive, solid-state drive, and optical drive. 

Hard drives usually come with their own set of screws so you’ll need to use those to secure it into the case. Most cases have dedicated 3.5-inch bays for hard drives so it should be easy to find the proper location. 

For solid-state drives, you’ll need to use the 2.5-inch to 3.5-inch adapters that come with the drive. These will allow you to install the SSD into a 3.5-inch bay. Once it’s in place, you can secure it with screws. 

Optical drives usually just snap into place so you won’t need any screws. Simply locate the 5.25-inch bay and then insert the drive. 

Step 8: Install I/O Shield: 

How To Install Gigabyte z390 Motherboard
Image Source Newegg Studios

The next step is to install the I/O shield. This is the metal plate that goes around the ports on the back of the motherboard. 

First, locate the I/O shield in the box with your motherboard. If it’s not already installed, you’ll need to do that now. Be careful not to touch the exposed ports on the back of the motherboard as this can damage them. 

Once the I/O shield is in place, you can start screwing in the motherboard. Be sure to not over-tighten the screws as this can damage the motherboard. 

Q. How do I install a Gigabyte motherboard?

A.  First, you’ll need to install the CPU and cooler. Next, you’ll need to install the memory modules. After that, you’ll need to install the motherboard. Finally, you’ll need to connect the power supply and install the storage devices. 

Q. Is the Gigabyte Z390 good for gaming?

A.   Yes, the Gigabyte Z390 is a good choice for gaming. It has plenty of features and performance to handle even the most demanding games. 

Q. What is the best CPU for the Gigabyte Z390?

A.  The best CPU for the Gigabyte Z390 is the Intel Core i7-8700K. It has a high clock speed and plenty of cores to handle even the most demanding games. 

Q. What is the best GPU for the Gigabyte Z390?

A.  The best GPU for the Gigabyte Z390 is the Nvidia GeForce RTX 2080 Ti. It has incredible performance and will be able to handle any game you throw at it. 

Q. What is the best RAM for the Gigabyte Z390?

A.  The best RAM for the Gigabyte Z390 is the Corsair Vengeance RGB Pro. It has a high clock speed and low latency to give you the best possible performance. 

Q. How do I turn on my Gigabyte motherboard?

A.   To turn on your Gigabyte motherboard, you’ll need to first connect the power supply. Next, you’ll need to press the power button. The power button is usually located on the front panel of the case. 

Q. Does gigabyte Z390 dual BIOS?

A.   Yes, the Gigabyte Z390 dual BIOS. This means that it has two separate BIOS chips. One is for the main system and the other is for backup. 

Final Words

Installing a Gigabyte z390 motherboard is a simple process that anyone can do. Just be sure to follow the steps in this guide and you’ll be up and running in no time. Once your Gigabyte motherboard is installed, you can enjoy all the benefits it has to offer. We hope that this guide was helpful and that you now feel a little more confident in your ability to install a motherboard. And don’t forget to check out our other hardware installation guides for more tips and tricks. Thanks for reading!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *