How to Install ASRock Z390 Motherboard

Are you looking for a new motherboard to upgrade your computer? Check out the ASRock Z390 motherboards! These motherboards are some of the best on the market and are perfect for gaming or business use. In this post, we’ll show you how to install an ASRock Z390 motherboard in your computer case. So, without further ado, let’s get started!

Installing Precautions

• Before we begin, there are a few things to keep in mind during the installation process. First of all, make sure that you’re grounded. This will prevent static electricity from damaging your components. You can do this by wearing an anti-static wrist strap or by touching a metal object before handling any components.
• Secondly, handle your components with care. Don’t force anything in and be careful not to drop or bend anything.
• Finally, pay attention to your motherboard’s manual. Each motherboard is different and the manual will have specific instructions on how to install it properly. Now that we’ve got that out of the way, let’s begin!

Step 1: Preparing Your Motherboard

Image Source: WooferVision

First, you have to prepare your motherboard by unwrapping it and removing the I/O shield. The I/O shield is the metal plate that covers the ports on the back of your motherboard. You’ll need to remove this so you can access the ports during installation.

Step 2: Install The Memory Module (RAM)

Image Source: GGF Events 

The next step is to install your memory module (RAM). Locate the RAM slots on your motherboard and remove the side locks. Now insert the modules into the slot carefully. Place each ram the same way. Make sure that they are firmly inserted and locked into place.

Step 3: Install I/O Shield

Image Source: GGF Events 

Remove the I/O shield from the motherboard and place it in the computer case. It should fit snugly and there should be no gaps. If it doesn’t fit properly, remove it and try again. Be careful not to bend the I/O shield as this can damage your motherboard.

Step 4: Install The Processor

Image Source: Tek Syndicate

Next, locate the CPU socket on your motherboard and unlock the lever. Carefully insert the CPU into the socket and close the lever. Make sure that it is firmly in place and locked. After installing the processor, apply thermal paste to the top of the CPU. This helps to improve heat conductivity and prevents your CPU from overheating.

Step 5: Install The Motherboard 

Image Source: GGF Events 

Now it’s time to install your motherboard into the computer case. Start by lining up the screws with the holes on the motherboard. Make sure that all of the screws are in place and hand-tighten them. Be careful not to overtighten as this can damage your motherboard.

Step 6: Install CPU Cooler

Image Source: GGF Events 

Now you have to install the CPU cooler into the case if you are using an after-market CPU cooler. Place the CPU cooler onto the CPU and line up the screws with the holes on the motherboard. Hand-tighten them until they are snug. Place the cooler head on the CPU and also screw it.

Step 7: Install Power Supply

Slide the power supply into the computer case and screw it in place. Be sure to use the proper screws as some power supplies come with their own set of screws.

Image Source: GGF Events 

Now you have to connect the power supply to the motherboard. First, find the 24-pin ATX power connector and connect it to the motherboard. Next, find the 8-pin EPS power connector and connect it to the motherboard. These are usually located near the CPU socket.

Step 8: Connecting The Front Panel Header

Image Source: GGF Events 

The next step is to connect the front panel header to your motherboard. This includes the power button, reset button, LED indicators, and audio jacks. To do this, locate the header on your motherboard and match it up with the header on your computer case. Once you’ve found the correct header, gently insert the cables and make sure they are firmly in place.

Step 9: Connecting The SATA Cables

Now you have to connect the SATA cables from your power supply to your hard drives. Locate the SATA ports on your motherboard and connect the cables. Make sure that they are firmly in place and not loose.

Step 10: Install GPU

Image Source: GGF Events 

To install GPU remove the protecting cover of the PCI slot and place the new GPU in the slot carefully until it locks into its place. After that screw the GPU in its place. Connect the power to the GPU from the power supply.

Step 11: Install Hard Drive / SSD / NVMe

Installing a hard drive or SSD is simple. Start by mounting the SSD or hard drive to the computer case. Once it’s in place, connect the data and power cables to the appropriate ports on your motherboard. Make sure that the cables are firmly in place and not loose.

Image Source: ASUS Singapore

Now connect the PC with the power and turn it ON. After turning it on install the BIOS and other drivers. Then enjoy your new system with a new motherboard.

FAQ

Q. Does ASRock Z390 Taichi have WiFi? 

A. Yes, this motherboard has WiFi capabilities. It comes with an 802.11ac WiFi (2.4G / 5G WiFi) module. This module allows you to connect to wireless networks and enjoy fast WiFi speeds.

Q. What is the maximum memory capacity of ASRock Z390? 

A. This motherboard has a maximum memory capacity of 64GB. It supports DDR4-2666 / 2400/ 2133 non-ECC, un-buffered memory.

Q. Does ASRock Z390 have TPM?

A.  This motherboard does not have TPM that’s why we recommend you to buy a TPM module separately if you want to use it.

Q. Does ASRock Z390 support overclocking? 

A. Yes, this motherboard supports overclocking. It has an 8+4 pin CPU power connector that provides enough power to the CPU for stable overclocking. It also has a PCIe 3.0 slot that supports NVIDIA SLI and AMD CrossFireX.

Conclusion

Installing a motherboard can be a daunting task, but it doesn’t have to be. With a little bit of patience and the right instructions, you can easily install your motherboard. Just be sure to take your time and be careful not to damage any of the components. If you’re looking to upgrade your computer, then ASRock Z390 is a great choice. If you have any questions, feel free to leave a comment below. Thanks for reading!

Are you looking for a new motherboard to upgrade your computer? Check out the ASRock Z390 motherboards! These motherboards are some of the best on the market and are perfect for gaming or business use. In this post, we’ll show you how to install an ASRock Z390 motherboard in your computer case. So, without further ado, let’s get started!

Installing Precautions

• Before we begin, there are a few things to keep in mind during the installation process. First of all, make sure that you’re grounded. This will prevent static electricity from damaging your components. You can do this by wearing an anti-static wrist strap or by touching a metal object before handling any components.
• Secondly, handle your components with care. Don’t force anything in and be careful not to drop or bend anything.
• Finally, pay attention to your motherboard’s manual. Each motherboard is different and the manual will have specific instructions on how to install it properly. Now that we’ve got that out of the way, let’s begin!

Step 1: Preparing Your Motherboard

Image Source: WooferVision

First, you have to prepare your motherboard by unwrapping it and removing the I/O shield. The I/O shield is the metal plate that covers the ports on the back of your motherboard. You’ll need to remove this so you can access the ports during installation.

Step 2: Install The Memory Module (RAM)

Image Source: GGF Events 

The next step is to install your memory module (RAM). Locate the RAM slots on your motherboard and remove the side locks. Now insert the modules into the slot carefully. Place each ram the same way. Make sure that they are firmly inserted and locked into place.

Step 3: Install I/O Shield

Image Source: GGF Events 

Remove the I/O shield from the motherboard and place it in the computer case. It should fit snugly and there should be no gaps. If it doesn’t fit properly, remove it and try again. Be careful not to bend the I/O shield as this can damage your motherboard.

Step 4: Install The Processor

Image Source: Tek Syndicate

Next, locate the CPU socket on your motherboard and unlock the lever. Carefully insert the CPU into the socket and close the lever. Make sure that it is firmly in place and locked. After installing the processor, apply thermal paste to the top of the CPU. This helps to improve heat conductivity and prevents your CPU from overheating.

Step 5: Install The Motherboard 

Image Source: GGF Events 

Now it’s time to install your motherboard into the computer case. Start by lining up the screws with the holes on the motherboard. Make sure that all of the screws are in place and hand-tighten them. Be careful not to overtighten as this can damage your motherboard.

Step 6: Install CPU Cooler

Image Source: GGF Events 

Now you have to install the CPU cooler into the case if you are using an after-market CPU cooler. Place the CPU cooler onto the CPU and line up the screws with the holes on the motherboard. Hand-tighten them until they are snug. Place the cooler head on the CPU and also screw it.

Step 7: Install Power Supply

Slide the power supply into the computer case and screw it in place. Be sure to use the proper screws as some power supplies come with their own set of screws.

Image Source: GGF Events 

Now you have to connect the power supply to the motherboard. First, find the 24-pin ATX power connector and connect it to the motherboard. Next, find the 8-pin EPS power connector and connect it to the motherboard. These are usually located near the CPU socket.

Step 8: Connecting The Front Panel Header

Image Source: GGF Events 

The next step is to connect the front panel header to your motherboard. This includes the power button, reset button, LED indicators, and audio jacks. To do this, locate the header on your motherboard and match it up with the header on your computer case. Once you’ve found the correct header, gently insert the cables and make sure they are firmly in place.

Step 9: Connecting The SATA Cables

Now you have to connect the SATA cables from your power supply to your hard drives. Locate the SATA ports on your motherboard and connect the cables. Make sure that they are firmly in place and not loose.

Step 10: Install GPU

Image Source: GGF Events 

To install GPU remove the protecting cover of the PCI slot and place the new GPU in the slot carefully until it locks into its place. After that screw the GPU in its place. Connect the power to the GPU from the power supply.

Step 11: Install Hard Drive / SSD / NVMe

Installing a hard drive or SSD is simple. Start by mounting the SSD or hard drive to the computer case. Once it’s in place, connect the data and power cables to the appropriate ports on your motherboard. Make sure that the cables are firmly in place and not loose.

Image Source: ASUS Singapore

Now connect the PC with the power and turn it ON. After turning it on install the BIOS and other drivers. Then enjoy your new system with a new motherboard.

FAQ

Q. Does ASRock Z390 Taichi have WiFi? 

A. Yes, this motherboard has WiFi capabilities. It comes with an 802.11ac WiFi (2.4G / 5G WiFi) module. This module allows you to connect to wireless networks and enjoy fast WiFi speeds.

Q. What is the maximum memory capacity of ASRock Z390? 

A. This motherboard has a maximum memory capacity of 64GB. It supports DDR4-2666 / 2400/ 2133 non-ECC, un-buffered memory.

Q. Does ASRock Z390 have TPM?

A.  This motherboard does not have TPM that’s why we recommend you to buy a TPM module separately if you want to use it.

Q. Does ASRock Z390 support overclocking? 

A. Yes, this motherboard supports overclocking. It has an 8+4 pin CPU power connector that provides enough power to the CPU for stable overclocking. It also has a PCIe 3.0 slot that supports NVIDIA SLI and AMD CrossFireX.

Conclusion

Installing a motherboard can be a daunting task, but it doesn’t have to be. With a little bit of patience and the right instructions, you can easily install your motherboard. Just be sure to take your time and be careful not to damage any of the components. If you’re looking to upgrade your computer, then ASRock Z390 is a great choice. If you have any questions, feel free to leave a comment below. Thanks for reading!