How to Connect a SSD to an ASROCK Z390 Motherboard

How to Connect a SSD to an ASROCK Z390 Motherboard

ASRock has a wide range of motherboards to choose from, and each one is designed with different features and specifications in mind. If you’re looking for a motherboard that can support a solid state drive (SSD), the ASRock Z390 motherboard is a great option. In this article, we’ll show you how to connect an SSD to an ASROCK Z390 motherboard. Let’s get started!

Precaution To Install SSD

Before you begin the installation process, there are a few things you’ll need to do in order to prepare your SSD.

First, you’ll need to back up any important data or files that are currently stored on your computer. This is important because the installation process will erase all data on the SSD. Once you’ve backed up your data, you’re ready to move on to the next step.

Next, you’ll need to format the SSD or install the new operating system. This can be done using a Windows or Mac computer. If you’re using a Windows computer, you can use the built-in Disk Management tool to format the SSD.

What you’ll need

  • A Phillips head screwdriver
  • An SSD (solid state drive)

How To Connect M2 SSD

1. Start by unscrewing the four screws that hold the M.2 slot cover in place. These screws are located on the back of the motherboard, near the I/O ports.

Image Source: Newegg Studios

2. With the screws removed, you can now lift the M.2 slot cover off of the motherboard.

3. Take your M.2 SSD and align it with the M.2 slot on the motherboard. Make sure that the notches on the SSD are lined up with the key on the slot.

Image Source: Newegg Studios

4. Gently insert the SSD into the slot until it is fully seated.

5. Use the screws that you removed earlier to secure the SSD in place.

Image Source: Newegg Studios

6. That’s it! You’ve now successfully installed your M2 SSD onto your ASRock motherboard.

Installing the SATA SSD

1. To install first of all you have to remove the SSD tray by removing the screws.

Image Source: MwaveAu

2. After removing the screws, place the SSD SATA device into the cover and screw it back again. Now place the cover into the case and screw it.

Image Source: MwaveAu

3. Now, connect your SSD to the motherboard using a SATA cable. You will see the SATA port near the 24pin connector or CPU.

Image Source: MwaveAu

4. Connect one end of the SATA cable to the SSD and another end to the available SATA port and also connect the power cable.

Image Source: MwaveAu

5. And That’s it. You have successfully installed an SSD on your computer.

Why Prefer SSD Over HDD

Solid State Drives offer a number of advantages over traditional hard drives. Some of the benefits of using an SSD include:

1. Faster boot times and quicker load times for programs and games.

2. More reliable and durable than hard drives, with no moving parts to break down.

3. Low power consumption means longer battery life for laptops.

4. Silent operation – no noise from spinning disks.

5. cooler operation, which can extend the life of your system.

6. SSDs tend to be more expensive than HDDs, but the price difference is shrinking.

7. Capacity – SSDs are available in larger capacities than ever before, with some models offering up to 4TB of storage.

FAQ

Q. Do I need to format my SSD before I can use it?

A. No, you don’t need to format your SSD before you can use it. However, we recommend that you create a fresh installation of your operating system on the SSD for optimal performance. As each motherboard has its own configuration.

Q. How long will an SSD last?

A. Solid state drives are designed for long-term use and have a lifespan of around 10 years. However, the actual lifespan of an SSD will depend on how you use it and treat it. If you are a hardcore computer geek, then it might affect the lifespan of your SSD.

Q. Do SSDs get slower over time?

A. No, SSDs do not generally get slower over time as HDDs can. However, if you fill your SSD to capacity and don’t leave any free space, it can start to slow down.

Q. Does ASRock support SATA?

A. Yes, ASRock supports SATA. However, we recommend that you use an M.2 SSD for the best performance.

Q. What is the difference between SATA and M.2?

A. M.2 is the newer standard and offers a number of advantages over SATA, including faster data transfer speeds and lower power consumption.

Conclusion

As you can see, it’s pretty easy to connect an SSD to an ASRock motherboard. If you’re looking for a fast and reliable drive, we recommend that you go with an M.2 SSD. However, if you’re on a budget or only need a small amount of storage, a SATA SSD will still offer significant performance improvements over a traditional hard drive. You can also check out the best motherboard for i7-9700k!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *